[tech] Ubuntu mouse problem on cybium

Alastair Irvine alastair at ucc.gu.uwa.edu.au
Thu Sep 22 16:44:11 WST 2005


On Thu, 22 September, 2005 at 04:31:56PM +0800, Trent Lloyd wrote:
[snip]
> And if you cat is, does it do things if you use the mouse?

Can't: not root.  Besides, the mouse's optical LED is not glowing.

> 
> if not, is 'mousedev' loaded, is hotplug started.

Yes, and yes (although "pciehp" said something about failing to gain
control of the native hot-plug).

>From dmesg on cybium:

  USB Universal Host Controller Interface driver v2.2
  ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 12 (level, low) -> IRQ 12
  uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
  uhci_hcd 0000:00:07.2: irq 12, io base 0xd000
  uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
  hub 1-0:1.0: USB hub found
  hub 1-0:1.0: 2 ports detected
  usb 1-2: new low speed USB device using uhci_hcd and address 2
  uhci_hcd 0000:00:07.2: Unlink after no-IRQ?  Different ACPI or APIC settings may help.
  usb 1-2: khubd timed out on ep0in
 [snip]
  usb 1-2: khubd timed out on ep0out
  usb 1-2: khubd timed out on ep0out
  usb 1-2: device not accepting address 2, error -110
  usb 1-2: new low speed USB device using uhci_hcd and address 3
  usb 1-2: khubd timed out on ep0in
  usb 1-2: khubd timed out on ep0out
  usb 1-2: khubd timed out on ep0out
  usb 1-2: device not accepting address 3, error -110

this continues up to address 5.

-- 
... "As we stumble around like blind moles on a glacier, a few things leap up and bite us on our poorly insulated fundaments" -- Richard Jenkins
 _____________________________________________________________________ 
|                                                                     |
|  -=*Alastair Irvine*=-   <http://www.ucc.gu.uwa.edu.au/~alastair/>  |
|  C-monkey/wanderer/board&RPGer/net-nut  alastair at ucc.gu.uwa.edu.au  |
|_____________________________________________________________________|


More information about the tech mailing list