[tech] Re: [wheel] Ftping to UCC servers

[Grahame Bowland]

On Tue, 2003-08-19 at 00:56, Bernard Blackham wrote:
> On Tue, Aug 19, 2003 at 12:45:18AM +0800, Grahame Bowland wrote:
> > On Tue, 2003-08-19 at 00:15, Bernard Blackham wrote:
> > > Also UCC's core router just changed, so ssh.ucc.asn.au isn't
> > > currently working either. If you can use scp, that'll be working
> > > again soon (tomorrow ideally :)
> > 
> > AFAIK the best way to set up ssh.ucc.asn.au and so on is to add
> > interfaces to hydra, AKA eth3.2:0, eth3.2:1, with the IPs of
> > ssh.ucc.asn.au and flame.ucc.asn.au, and then do the NAT magic onto them
> > :-)
> 
> Sounds good - will try it in the morning.
> 
> So far as I can tell, the Accelar can't do ip aliasing - so the
> 172.26. gateways (.3, .65, etc) will probably have to be a hydra
> thing, when WAIX comes back.

Ah, that's going to suck. I'm sure there must be a way to do it.
Otherwise, people leaching off WAIX are going to get hit with hydra
speeds.

I suspect one way to do it is to create another VLAN with the
172.26.42.3 IP on it, and then add it to all of the machine room ports,
without selecting trunking. Try that, it might work (obviously, try it
on one port, like mojarra, see if it works, then go on from there :P)

It makes sense for that to work, anyway. I'd poke it, but it's not a
good idea from here :-)

-- 
Grahame Bowland                                     finger some of the
<grahame at angrygoats.net>                people that walked in darkness
                                               have seen a great light